When using Double Girder Gantry Crane in harsh environments, special protective measures must be taken to ensure its safe and stable operation. The following are the specific contents:
1. Anti-corrosion measures
In harsh environments, corrosion is one of the main problems faced by Double Girder Gantry Crane. In humid, salt spray and other environments, metal structures are prone to rust and corrosion. First, corrosion-resistant materials can be used to manufacture the main structural components of the crane, such as stainless steel or special anti-corrosion treatment. Secondly, regular anti-corrosion maintenance should be performed on the crane, such as painting anti-corrosion paint, spraying anti-corrosion agents, etc., to form an effective protective layer. In addition, strengthening the ventilation of the crane and reducing humidity can reduce the probability of corrosion.
2. Anti-wind and sand measures
In areas with strong wind and sand, wind and sand may have a serious impact on the operation of the crane. On the one hand, anti-wind and sand covers can be installed to protect the key parts of the crane, such as motors, reducers, etc., to prevent wind and sand from entering the interior and damaging mechanical parts. On the other hand, the sealing performance of the crane should be strengthened to ensure that each connection part is well sealed to prevent wind and sand from invading. At the same time, in strong wind and sand weather, the frequency of crane use should be minimized, and reinforcement measures should be taken if necessary to prevent the crane from being blown down or displaced by strong winds.
3. Waterproof and moisture-proof measures
If the crane is used in a rainy or high humidity environment, waterproofing and moisture-proofing are essential. Install a waterproof cover for the crane's electrical equipment to prevent rainwater from entering and causing short circuits and other faults. Set up a good drainage system on the track and foundation to remove the accumulated water in time. For the electrical control system, electrical components with good waterproof performance should be used, and their insulation performance should be checked regularly to ensure that they can still work normally in a humid environment.
4. High and low temperature resistance measures
In extremely high or low temperature environments, the performance of the crane will be greatly affected. In a high temperature environment, to ensure that the crane has good heat dissipation, you can add heat dissipation equipment or take insulation measures. For a low temperature environment, select lubricating oil and hydraulic oil suitable for low temperatures to prevent them from solidifying. At the same time, the key parts of the crane should be insulated to avoid damage to mechanical parts due to low temperatures. In extremely cold weather, the crane should be preheated before starting to ensure the normal operation of the equipment. In short, for the Double Girder Gantry Crane in harsh environments, only by taking these special protective measures can its safe and reliable operation be guaranteed.
